Switching brands or sourcing a second supplier? This guide maps HP, Servo (IndianOil) and Castrol India lubricants to equivalent Banesto grades — category by category, ISO grade by ISO grade — so you can make a direct, informed comparison.
Both products typically meet similar performance specifications. Verify applicable OEM approvals for your specific equipment and perform a standard system flush per changeover procedure.
Performance gap is small and manageable in typical operating conditions. Review application-specific OEM requirements before switching under extreme loads or temperatures.
Banesto may offer an alternative from a different series, or the application may require a custom development. Contact our technical team to discuss options.
This guide is written for maintenance engineers, procurement managers and plant lubrication supervisors in India who are evaluating whether Banesto can replace or supplement HP, Servo or Castrol lubricants across their installed equipment base.
Each category page below contains a grade-by-grade comparison table, key specification notes, and direct links to Banesto technical datasheets. Where a gap exists, we explain why — so you can make an informed decision rather than a blind substitution.
Important: Lubricant equivalence is always application-specific. This guide reflects typical formulation comparisons and should not replace a full technical assessment for critical equipment. Banesto's application engineers are available for on-site consultations at no charge.
Selected high-volume grades. See category pages for full grade-by-grade tables.
| Category | HP Product | Servo Product | Castrol Product | Banesto Grade | Tier |
|---|---|---|---|---|---|
| Hydraulic Oil VG 46 | ENKLO HLP 46 | SERVOSYSTEM 46 | HYSPIN AWS 46 | Hydraulic Oil HLP 46 | Direct |
| Hydraulic Oil VG 68 | ENKLO HLP 68 | SERVOSYSTEM 68 | HYSPIN AWS 68 | Hydraulic Oil HLP 68 | Direct |
| Industrial Gear Oil VG 220 | GEAR EP 220 | SERVOMESH SP 220 | ALPHA SP 220 | Industrial Gear Oil ISO 220 | Direct |
| Rotary Compressor Oil VG 46 | RUSTAM 46 | SERVO PRESS 46 | AIRCOL SN 46 | Compressor Oil (ISO 100) | Near |
| Multipurpose Grease NLGI 3 | HP LITHON 3 | SERVO GEM EP 3 | CASTROL LB 3 | Lithium Complex MP NLGI 2/3 | Direct |
| Neat Cutting Oil | HP CUTTING OIL 220 | SERVO CUT S | CASTROL HYSOL XF | Cutting Oil (Neat) | Near |
| Fire-Resistant Hydraulic (HFD-U) | ENKLO FRDU | SERVO FRWG 46 | HOUGHTO-SAFE 419 | PAG / Water-Glycol FR Fluid | Near |
| Phosphate Ester FR (HFDR) | ENKLO FRPS | — | FYRQUEL EHC | — | Gap |
Need a full cross-reference for your plant?Banesto's application engineers will map your complete lubricant inventory to Banesto equivalents and flag any gaps — free of charge for qualifying industrial accounts.